If you’re looking for a variable wattage vape package with WOW factor, this Wotofo FLUX 200W Vape Kit delivers on every level! A design collaboration with US mech mod specialists, Rig Mod, this kit’s FLUX mod provides an instant hard-hit as soon as you press the Fire button. When that surge of power hits the Flow Pro tank’s perforated mesh coil, the result is an incredible burst of cloud and flavour.
FREE 5 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL! With a simplified menu system, the 200 Watt Flux mod is easy for new and experienced vapers to handle. New vapers may prefer to start-out by using the mod’s ‘Standard’ firing mode. Even in this default mode, the firing ramp-up time is significantly faster than other mods with similar specifications. Experienced vapers who enjoy the thrill of a hard hit, can try out two higher levels of power performance. Check out ‘Powerful’ mode for even faster firing, or ‘Powerful +’ for a ramp-up time that’s very close to zero seconds!
FREE 5 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL! Without the complexities of Temperature Control and memories, the Flux mod’s colour screen looks simple, sharp and precise. An internal LED also illuminates the front of the mod with your chosen colour. There are 6 screen colour options, along with a range of different flash and fade effects for the LED. The lightshow can be turned off when you need to keep a low-profile. The left side of the FLUX mod is an exquisitely designed Fire bar. A gentle squeeze is all that’s required to activate the fireworks.
The FLUX kit’s 25mm Flo Pro Tank comes with two of Wotofo’s perforated mesh coils. With a much greater surface area than traditional coil wire, mesh technology is becoming the go-to format for top all-round performance. The surprising thing about the Flo Pro tank, is its compatibility with the full range of SMOK Baby Beast coils. Apart from coil compatibility, the Flo Pro tank also features the sideways hinged top-cap, and chunky metalwork found on some of SMOK’s most popular tanks. To fine-tune the Flow Pro’s mesh vape, the tank has triple adjustable airflow slots on the base.
This power-focused FLUX 200W vape package requires two matched 18650 batteries – these aren’t included with the kit. The colour-matched mod and tank can be ordered in one of 9 fabulous finishes: Red, Green, Black, Blue, Dark Blue, White, Stainless Steel, Rainbow, or Gunmetal.
Note: This vape kit will require 2 x matched 18650 batteries and high vg e juice before being ready to vape. These items can be ordered from our Accessories and E Liquids pages or by clicking the previous link.
Contents: 1 x Wotofo FLUX 200W Mod 1 x Wotofo Flow Pro Tank (TPD version) 2 x Flow Pro Mesh Coils 1 x Spare Bubble Tank Glass 1 x 510 Drip-Tip Adapter 1 x Spare O Ring Pack 1 x USB Battery Charge Cable 1 x FLUX Kit User Manuals
Wotofo FLUX 200W Mod Features: Size: 91.6mm tall, 50.8mm long, 30.3mm wide Screw: Central 510 connector with sprung pin Zinc alloy case metal Style: High-power variable wattage mod with fast ramp-up pre-sets A collaboration project with mech-mod experts, Rig Mod Battery requirements: 2 x matched 18650 batteries (not included) Stylish side Fire bar Integrated + & - setting adjuster bars around screen Display: 1.3 inch colour OLED screen 6 Screen colour options LED light bar on front of mod Range of lightshow flash & breathe settings LED can be switched off for stealth vaping Simplified menu system (no Temp Control features) ‘Standard’, ‘Powerful’, & ‘Powerful +’ firing modes Power settings: 5 to 200 Watts Compatible coil resistances: 0.08 to 3.0 Ohms USB charging port below LED bar Comes with a USB charging cable Max. charge current: 1.5 Amps Hits like a quality mechanical mod ‘Powerful +’ mode has a firing response close to 0 sec Superb mod for advanced variable wattage vapers Easy mod for beginners to use Available in Green, Black, Blue, Dark Blue, Red, White, Stainless Steel, Rainbow, or Gunmetal.
Wotofo Flow Pro Tank (TPD Edition) Features: Size: 41.1mm x 25mm (without drip-tip) Tank capacity with fitted glass: 2ml (TPD legal) Fitted with a comfort-curved 810 Delrin drip-tip Comes with a 510 drip-tip adapter Standard 510 vape connector with fixed pin Push-open top-cap with sideways hinge Top-cap stays on tank while filling Tank metal: Stainless Steel Glass section: Pyrex glass Spare 5ml bubble glass also included Triple adjustable airflow slots on tank base This tank is compatible with all SMOK Baby Beast coils Standard, screw-in coil replacement system Fitted with a Flow Pro 0.18 Ohm Mesh coil (40 to 60W) Spare Mesh coil also included Mesh has much larger surface area than coil wire Superior flavour at moderate wattage settings Excellent cloud production Smooth vaping experience Satisfying vapour density Colour matched with FLUX mod
Wotofo FLUX Kit Compatibility: Both the FLUX mod and Flow Pro tank are easily interchangeable with similar devices from other manufacturers. The FLUX mod will be particularly appealing for owners of rebuildable atomizers. Please check all equipment manuals carefully to ensure that swapped devices are fully compatible.
Warranty: For warranty information see our terms & conditions page.
We only ship orders to UK and operate a Same Day Dispatch (99% of the time, sometimes delays may occur) on all orders placed before 4pm on working days (Monday to Friday excluding weekends & Bank Holidays). Any orders placed after 4pm cut off on weekdays (Monday to Friday) or over weekends, will be dispatched the next WORKING day. We do not dispatch goods over weekends or bank holidays and do not offer delivery on Bank Holidays.
When you place an order, we will estimate a delivery date for you based on the shipping method you have chosen. This is an estimation only and is not guaranteed delivery date. All orders are shipped in discreet packaging.
You may return most new unopened items (excluding e liquids) within 14 days of delivery for a full refund excluding our postage costs we have incurred. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect item etc.). If the item is reported as defective, we will check item for issue/fault before deeming it faulty.
You should expect to receive your refund within 7 working days of the return arriving with us and being deemed faulty, however, in many cases you will receive a refund more quickly. This time period includes the product testing and the time it takes your bank to process our refund request (3 to 5 working days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
This Product has 1 review
Great bit of kit5
Posted by Adrian Trigg on 7th Aug 2018
I wanted a kit that didn't seem over complicated and was easy to use. As I don't bother with TC. This seemed ideal, the flavour with the mesh coil is great and the whole kit works brilliantly.