Related Products
Featuring some of the latest innovations in mouth-to-lung vaping, this CuBox Mod With Cubis 2 Tank Kit comes with phenomenal battery life. Sleek and simple, the CuBox mod has a powerful, 3000mAh built-in battery. For easy operation, the mod is a single button, direct output device, needing no complicated set-up or adjustments. The kit’s Cubis 2 tank is fitted with a child-lock and is fully TPD compliant. The tank delivers a tight, cigarette style draw.
FREE 3 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL(3mg or 6mg recommended!)
The CuBox mod is compact and exquisitely styled. Joyetech have positioned the Fire button in just the right spot for comfortable left, or right-handed operation. The battery charge level is shown on a fan-shaped display on top of the mod. Five LED bars are illuminated when the battery is firing on full-power. This drops down to one bar when the battery is firing on low power. To prolong the life expectancy of the battery, an illuminated Joyetech logo will flash when a recharge is needed. A cable is provided to plug the CuBox into a USB power source. The mod is capable of fast, 2 Amp charging with a suitable mains adaptor (not supplied).
Joyetech’s Cubis 2 tank is a delight to use. By lining-up the arrows on the top-cap and airflow adjustment ring, the tank’s child-lock can be flipped into the ‘open’ position. This gives easy access to big, twin filling slots. The TPD regulations limit the tank’s capacity to 2ml.
When you need to change the coil or clean the tank, the whole top section can be unscrewed. The kit comes with two ProC-BFL 0.6 Ohm coil heads. Technically, these are sub-ohm coils, but internal airflow is restricted to give a tight, comfortable draw with reduced cloud volume. The tank’s dual-slot, top airflow adjuster allows you to fine-tune cloud volume and vape warmth. The top-airflow design also eliminates the risk of e juice leaks.
FREE 3 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL(3mg or 6mg recommended!)
This good-looking kit is ideal for any cigarette smoker who’s made the decision to switch to vaping. Joyetech are renowned for their safe, easy-to-use vaping starter kits, and this CuBox Mod and Cubis 2 tank package offers superb value for money.
Choose a colour finish from: Blue, Red, Yellow, Black, White or Silver.
Note: This Joyetech mouth-to-lung kit doesn’t come with e liquid – please order separately from our Eliquids pages, or click this link.
Contents:
1 x Joyetech CuBox 3000mAh Mod
1 x Joyetech Cubis 2 Tank (TPD Legal)
2 x Joyetech ProC-BFL 0.6 Ohm Coil Heads (Fitted & Spare)
1 x Push-in 510 Drip-Tip Extension
1 x Spare Pyrex Glass Tube Section
1 x USB Cable (Quick Charge Capability)
1 x Spare Parts Package
1 x Warranty Leaflet
1 x Equipment User Manuals
Joyetech CuBox 3000mAh Mod Features:
Size: 105mm x 41mm x 22.5mm
Connector: 510 screw with Stainless Steel plate
Style: Simple, direct output mini-mod with 1 button control
Battery: Built into mod – 3000mAh capacity
Capable of fast, 2 Amp recharges with power adaptor (not supplied)
Comes with a USB charging cable
Fan style battery power LED display on top of mod
Flashing icon displays atomizer faults & low battery warning
Max power output: 50 Watts
Direct output – all remaining battery power applied to atomizer
Atomizer resistance range: 0.2 to 3.5 Ohms
Single button operation (Fire)
Fire button & display positioned for comfortable LH/RH operation
5 press safety switching with Fire button
Firing safety cut-out after 15 seconds
Safety ventilation on base of mod
Compact, clean mod for pocket or bag
Ideal as a simple, stylish mod/battery for new vapers
Great for powering mouth-to-lung atomizers
3000mAh internal battery extends vape time between charges
Paint finishes: Black, White, Blue, Yellow, Red or Silver
Joyetech Cubis 2 Tank Features:
Height: 43mm
Diameter: 22mm
Weight: 37.5g
E liquid capacity with supplied coils: 2ml (TPD approved)
Case metal: Plain/painted Stainless Steel
Connection: 510 screw (fixed pin)
Style: Clean, compact atomizer fitted with a TPD compliant MTL coil
Comes with 0.6 Ohm ProC-BFL coil, rated 15 to 28W (tight MTL draw)
Supplied coil wire: SS316 grade Stainless Steel
Spare coil included
Coils wicked with organic cotton
Flip-back child-lock on top-cap
Top cap stays connected to tank while filling
Big e juice filling ports below top-cap
Top-airflow design (variable)
Twin airflow slots on tank top-section
Comes with a fixed, conical Delrin drip tip
Plug-in standard bore drip-tip extension included
Comes with replacement Pyrex tank section
Comes with an O ring/seals spares pack
Supplied with fatter, TPD compliant coils
Supplied coils are designed to give a tight, mouth-to-lung draw
Direct lung & standard width coils are also available for this tank
Clean, easy-to-use tank – perfect for new vapers
Colour matched with the supplied mod
CuBox / Cubis 2 Device Compatibility:
Cubis 2 coils are compatible with Cubis Pro, eGo AIO, eVic and Elitar Pipe devices. This kit’s Proc-BFL coils are designed with a fatter body. This reduces the capacity of the Cubis 2 tank to 2ml. Replacement Joyetech Proc-BFL coils can be ordered by clicking here, or visiting our Accessories pages. Alternatively replacement Joyetech Proc-BF coils can be ordered by clicking here allowing increased tank capacity
Warranty:
For warranty information see our terms & conditions page.
We only ship orders to UK and operate a Same Day Dispatch (99% of the time, sometimes delays may occur) on all orders placed before 4pm on working days (Monday to Friday excluding weekends & Bank Holidays). Any orders placed after 4pm cut off on weekdays (Monday to Friday) or over weekends, will be dispatched the next WORKING day. We do not dispatch goods over weekends or bank holidays and do not offer delivery on Bank Holidays.
When you place an order, we will estimate a delivery date for you based on the shipping method you have chosen. This is an estimation only and is not guaranteed delivery date. All orders are shipped in discreet packaging.
You may return most new unopened items (excluding e liquids) within 14 days of delivery for a full refund excluding our postage costs we have incurred. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect item etc.). If the item is reported as defective, we will check item for issue/fault before deeming it faulty.
You should expect to receive your refund within 7 working days of the return arriving with us and being deemed faulty, however, in many cases you will receive a refund more quickly. This time period includes the product testing and the time it takes your bank to process our refund request (3 to 5 working days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Customer Reviews
