Check out this military style, iTaste Hunter iSub V Starter Kit from Innokin. With a pistol grip feel, a lanyard clip and a high-grip back strap, this eye catching starter kit is great for outdoor vaping. The iTaste Hunter kit comes with a 75 Watt mod and an iSub V sub-Ohm tank. The Hunter mod handles both variable wattage and temperature control vaping. This makes it the ideal partner for the kit’s 3ml iSub V tank with stainless steel coils.
It’s not just the pistol-grip styling that makes the iTaste Hunter kit so startling. The mod also sports a circular OLED display screen which really makes it stand out from the crowd. Functionally, the mod handles variable wattage and temperature control with military precision. A ‘pre-boost ramp-up’ feature can be deployed to pre-heat your coil for an almost instant response when you press the fire button. The Hunter mod’s Aethon chipset also delivers advanced features, like dry-hit protection, a vape timer and puff counter.
To complement the Hunter mod, Innokin box this starter kit with a dual mode, iSub V tank. The iSub V has a number of special design features which make it ideal for sub-Ohm vaping in temperature control (TC) mode. The main advantage of temperature controlled vaping is the consistency of the warmth, flavour and cloud volume of each draw. For the ultimate convenience, the iSub V’s 0.5 Ohm stainless steel coil heads will also work exceptionally well in variable wattage (VW) mode.
The iSub V is an easy-to-use atomizer tank that’s popular with new and experienced vapers. An airflow control ring on the iSub V’s base can be set to fine-tune your vaping experience for any particular e liquid. Like most modern atomizers, it has a simple, fast top-fill facility. Innokin’s quick change, ‘no-spill’ coil head replacement system is particularly clean and convenient. Replacement coil heads are cheap and widely available.
The iTaste Hunter iSub V Starter Kit is available in 6 stunning colours: Red, Black, White, Blue, Geen or Desert.
Note: Innokin’s Hunter mod requires a separate 18650 battery and charger (links). E liquid is not supplied with this starter kit – please order separately from our E liquids pages (link).
Contents:
1 x Innokin iTaste Hunter 75W TC Mod
1 x iSub V 3ml Atomizer Tank
2 x iSub SS316L 0.5 Ohm Coil Heads
1 x Wide Bore 510 Delrin Drip-Tip
1 x Spare O Rings
1 x Innokin Vape Band
1 x User Manual
Note: This starter kit requires a separate 18650 battery and charger.
Innokin iTaste Hunter 75W TC Mod Features:
Size: 89mm x 50mm x 25mm
Connector: Sprung 510 screw with base airflow
Battery type: Single high output 18650 type (not supplied)
Switches between TC and VW modes
Output power: 6 to 75 Watts in 5 Watt increments
Temp. range: 150 to 315ºC in 5º increments
Max output current: 27.5 Amps
Max output voltage: 7.5 Volts
Min coil resistance: 0.1 Ohms
Ni TC coil resistance: 0.1 to 0.2 Ohms
Ti TC coil resistance: 0.1 to 0.5 Ohms
SS316L TC coil resistance: 0.2 to 1.0 Ohms
Press fire button 3 times for on/off safety switching
Circular OLED display screen
Military/outdoor styling
Handy lanyard attachment bar
Fire and up/down control buttons
New/Same coil prompt
Precise temperature control for a consistent vape
Dry hit detection & cut-out circuit
Built-in puff counter
Displays vape timer
Displays battery level
Adjustable pre-boost wattage ramp-up
Ultra-low power consumption on standby
Great looking mod with a rugged design
Superb, glitch-free temperature control
6 Case colour options: Desert, Red, Black, White, Blue & Green
iTaste Hunter 75W Mod Safety Features:
Cuts off automatically after 15 seconds firing
Low voltage warning & cut-off
Dry hit cut-out
Short circuit lock-out feature
Overheating circuit board warning & cut-off
Accidental battery reversal protection
Battery vent on screw down compartment cap
iSub V 3ml Atomizer Tank Features:
iSub Tank diameter: 22mm
E liquid capacity: 3ml
Tank case: Stainless Steel
Tank material: Toughened Pyrex glass
Drip-tip: Wide bore 510 type (Delrin)
Accepts any 510 drip-tip
Filling: Clean, top-fill access to e liquid tank
Airflow: Adjustable ring with 2 slots on tank base
Connector: Sprung pin (510 standard)
Comes with 2 x 0.5 Ohm SS316L VW / TC coil heads
Special, easy coil change system
Fast, simple strip-down for cleaning
Formidable flavour & cloud generation
Innokin iTaste Hunter Kit compatibility:
The iTaste Hunter mod will fire replaceable Kanthal and Stainless Steel coil heads rated up to 75 Watts in variable wattage mode. In temperature control mode, the mod will fire NI200, Titanium and Stainless Steel coils at temperatures up to 315ºC. Please follow the manufacturer’s instructions carefully when switching between modes. The iSub V Tank is compatible with all of the replaceable coil heads in the iSub range below:
Replacement iSub SS BVC Coils can be purchased by clicking here(30 to 60 Watt range)
Replacement iSub Clapton Coils can be purchased by clicking here (30 to 70 Watt range)
Replacement iSub KAL BVC Coils can be purchased by clicking here(30 to 60 Watt range)
Replacement iSub Coils can be purchased by clicking here (20 to 35 Watt range)
Warranty:
For warranty information see our terms & conditions page.
We only ship orders to UK and operate a Same Day Dispatch (99% of the time, sometimes delays may occur) on all orders placed before 4pm on working days (Monday to Friday excluding weekends & Bank Holidays). Any orders placed after 4pm cut off on weekdays (Monday to Friday) or over weekends, will be dispatched the next WORKING day. We do not dispatch goods over weekends or bank holidays and do not offer delivery on Bank Holidays.
When you place an order, we will estimate a delivery date for you based on the shipping method you have chosen. This is an estimation only and is not guaranteed delivery date. All orders are shipped in discreet packaging.
You may return most new unopened items (excluding e liquids) within 14 days of delivery for a full refund excluding our postage costs we have incurred. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect item etc.). If the item is reported as defective, we will check item for issue/fault before deeming it faulty.
You should expect to receive your refund within 7 working days of the return arriving with us and being deemed faulty, however, in many cases you will receive a refund more quickly. This time period includes the product testing and the time it takes your bank to process our refund request (3 to 5 working days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Customer Reviews
-
Excellent vapour production!
This is a very well made mod. Nicely weighted, good looking and tough. Very easy to just pop in a single 18650 battery, fill the included isub V and then clouds after clouds!