Both devices have been designed with simplicity in mind, meaning the setup process is straightforward even if you are new to vaping. However, taking a few minutes to prepare the device properly will ensure the coil prebuilt into the vape pod performs well and the pod lasts as long as possible.

Before using the device for the first time, make sure the battery is charged and the vape pod has been filled with e-liquid. After filling the pod, it’s important to allow the coil inside the pod to absorb the liquid before vaping.

Priming your pod correctly:

Priming the coil ensures the cotton wick inside the pod becomes fully saturated with e-liquid. This prevents the coil from burning prematurely and helps maintain strong flavour from the first puff.

To prime a new XROS pod:

• Fill the vape pod with your chosen e-liquid
• Leave the filled pod for around 5 to 10 minutes
• Insert the pod into the device
• Begin vaping normally

Taking this step may seem small, but it significantly improves the lifespan of the pod and prevents burnt flavour early on.

The Vaporesso XROS 5 vape kit includes a small control button that allows users to access additional features and adjust the device settings. The device can be turned on or off by pressing the button five times quickly. This safety feature prevents accidental activation when the device is carried in a pocket or bag.

The button also allows users to adjust the device power output. By pressing the button three times, you can cycle through the available power settings displayed on the screen.

The XROS 5 offers three output modes:

Eco Mode:

• Designed to extend battery life
• Produces a cooler, slightly softer vape
• Ideal for lighter users or longer sessions

Normal Mode:

• Balanced output between flavour and battery efficiency
• Suitable for everyday vaping

Power Mode:

• Delivers stronger output to the pod
• Produces warmer vapour and more intense flavour

The XROS 5 also includes a lock function to prevent accidental button presses. Pressing the button four times locks or unlocks the fire button while still allowing draw activation.

The XROS 5 Mini takes a more minimalist approach. It removes the button entirely and relies solely on draw activation. Instead of pressing a button, the device activates automatically when you inhale through the mouthpiece. This makes the Mini particularly appealing to beginners, as it closely replicates the natural inhale of a cigarette.

Despite the simplified design, the Mini still includes adjustable airflow and the same COREX pod compatibility as the standard XROS 5.

One of the key improvements in the XROS 5 generation is the 1500mAh battery, which is larger than many earlier XROS devices. This increased capacity allows the device to last significantly longer between charges. Both the XROS 5 and the XROS 5 Mini charge through a USB-C port, which allows for faster and more efficient charging compared to older micro-USB systems.

Under typical use, most moderate vapers find the battery comfortably lasts through the day. Lighter users may get even longer usage before needing to recharge.

Battery monitoring differs slightly between the two devices:

XROS 5

• Displays an exact battery percentage on the screen
• Allows users to monitor remaining power precisely

XROS 5 Mini

• Uses a coloured LED indicator
• Provides a quick visual reference for battery level

Charging typically takes around 30 minutes, depending on the power source used.

The XROS 5 and XROS 5 Mini use Vaporesso XROS COREX pods, which feature a top-fill system designed to make refilling quick and clean.

To refill your pod:

●    Remove the pod from the device
●    Snap the mouthpiece away from the pod
●    Locate the red fill port
●    Insert your e-liquid nozzle and fill the pod
●    Replace the mouthpiece securely

It’s important to avoid filling the centre hole inside the vape pod, as this connects directly to the vape coil and can cause leaking or e-liquid entering the airflow channel. The transparent pod body allows you to easily monitor how much e-liquid remains inside.

Pod replacement is one of the easiest maintenance tasks with the XROS series. Each pod contains a built-in coil, meaning the entire pod is replaced when the coil reaches the end of its lifespan.

To replace a pod:

• Remove the old pod by pulling it upwards
• Insert a new pod into the device
• Allow the new pod to prime if it has just been filled

Magnets inside the device secure the pod firmly in place, ensuring proper electrical contact with the device. Another benefit of the XROS system is that pods are cross-compatible across the entire range, allowing users upgrading from older models to continue using the same pods.

Like any coil, XROS pods gradually wear out over time. Recognising the signs of a worn pod helps maintain flavour quality and prevents unpleasant vaping experiences.

Common indicators include:

Burnt or muted flavour - This is usually the first sign the coil has reached the end of its lifespan.

Darkened e-liquid - If the e-liquid inside the pod becomes noticeably darker soon after filling, this may indicate coil degradation.

Reduced vapour production - A worn coil will struggle to produce vapour efficiently.

Gurgling or spitting - While occasional condensation can cause this, persistent bubbling may indicate the pod needs replacing.

Both the XROS 5 and the XROS 5 Mini include an airflow adjustment slider on the back of the device. Airflow control allows users to customise how tight or loose the inhale feels and adjusting the airflow can change the vaping experience significantly:

Open airflow:

• Produces a looser inhale
• Slightly increases vapour production
• Suitable for lower resistance pods

Restricted airflow:

• Creates a tighter draw similar to a cigarette
• Concentrates flavour
• Often preferred with higher resistance pods

Most users gradually adjust the airflow until they find a comfortable balance between vapour and draw resistance.

Even reliable devices can occasionally experience minor issues. Fortunately, most problems can be resolved quickly with a few simple checks. If your device is not producing vapour or behaving unexpectedly, consider the following steps.

1. Check the battery level: The most common reason a vape stops working is simply a depleted battery. If the device shows a low battery indicator or flashing light, connect it to a charger and allow it to recharge fully.

2. Inspect the pod connection: Sometimes small amounts of e-liquid condensation, dust or lint can accumulate on the connection points between the pod and the device.

To resolve this:

• Remove the pod from the device
• Wipe the contact points with a dry cloth or tissue
• Reinsert the pod firmly

3. Ensure the pod is installed correctly: If the pod is not seated properly, the device may fail to detect it. Remove the pod and reinstall it carefully until the magnets pull it into place.

4. Replace the pod if necessary: If the Vaporesso coil inside the pod has reached the end of its lifespan, the device may produce little or no vapour. Installing a fresh pod often resolves the issue immediately.

5. Check airflow and condensation : Occasionally, excess condensation can accumulate in the airflow chamber.

To clear it:

• Remove the pod
• Hold a tissue near the airflow openings
• Gently blow through the mouthpiece to clear liquid buildup

If problems persist after these steps, consulting the device manual or contacting the retailer is recommended.

The coils used in XROS pods are designed for 50/50 VG/PG e-liquids or high-PG blends. These thinner liquids absorb quickly into the coil, ensuring consistent vapour production and preventing dry hits.

Many customers using XROS devices choose:

• Nicotine salt e-liquids
• 50/50 freebase nicotine e-liquids
• Bar-style nic salts with stronger flavour

At Go Smoke Free, freebase and nicotine salt blend vape liquid brands such as OMG, Hangsen, Elux, SKE Crystal and Elfliq are particularly popular choices due to perfect viscosity of 50/50 VG PG and their wide flavour ranges and smooth nicotine delivery.

While the overall design of the XROS series remains familiar, the fifth generation introduces a few meaningful improvements. The most noticeable upgrades from the Vaporesso XROS 4 include:

• A larger 1500mAh battery
• The addition of a display screen on the XROS 5
• Improved battery indicators on the Mini
• Updated power modes and screen customisation

These changes improve usability without altering the simple, pocket-friendly design the XROS series is known for.

The Vaporesso XROS range has built its reputation on reliability, and the latest generation continues that tradition.

The Vaporesso XROS 5 offers additional control through its display screen and adjustable power settings, making it a strong option for users who like to fine-tune their vaping experience.

The Vaporesso XROS 5 Mini, on the other hand, focuses on simplicity. By combining draw activation with adjustable airflow and a large battery, it provides a straightforward device that still performs exceptionally well.

For customers visiting Go Smoke Free, the XROS series remains one of the most consistently recommended pod systems available. It’s compact, dependable and compatible with a wide range of e-liquids, making it a reliable everyday device for many types of vapers.

Shop: Vaporesso XROS 5 Vape Kit
Price: £23.99

Shop: Vaporesso XROS 5 Mini Vape Kit
Price: £15.49

Alongside Vaporesso, at Go Smoke Free we have you covered with a huge range of vaping products to suit your lifestyle. From basic vape starter kits to more advanced refillable vape kits and Big puff vapes, we have devices for all kinds of vapers. Our e-liquid collection is HUGE, with everything from shortfill e-liquids, high PG liquids and high VG liquids to nic-salt liquids and nicotine free liquids to choose from.