If you’re looking for a fresh vaping experience, this Vandy Vape Mesh 24 RDA will open-up a whole new world of flavour. Designed mainly for veteran dripping fans, the 24mm diameter Mesh RDA offers a quick, simple route into vaping with fine wire mesh. If you decide that mesh vaping isn’t your style, this RDA’s postless, clamp build deck can also accommodate single and dual DIY coil builds.
As well as handling almost any type of DIY coil setup, Vandy Vape’s Mesh 24 RDA kit also includes an alternative squonk pin. The pre-fitted standard pin is compatible with all types of mod – including Hybrids. As an alternative to the fitted Ultem drip-tip, there’s a low-profile ‘Doc’ drip-tip in the spares bag. The bag is also packed with all the tools that you need for your first mesh build.
The Mesh 24 RDA’s flat build deck features two long slots – each with a below-deck clamp. Tightening screws can be found on each side of the RDA. Whether you choose to build with mesh or coils, this is probably one of the easiest build decks that you’ll ever work with.
Vaping with mesh is becoming increasingly popular, and this Mesh 24 RDA kit comes with samples of Kanthal, Nickel and Stainless Steel mesh wire for you to try-out. Vandy Vape have also released bulk spools of vaping mesh (not supplied), which can be bought as replacements for the mesh-wire samples.
Technically, vaping with mesh is very similar to vaping with a normal coil. After the mesh-wire is connected between the deck terminals, a generous bundle of wicking cotton (not supplied) is placed beneath the mesh-wire bridge. As well as soaking into the cotton, e liquid is also drawn into the woven mesh. When you press the fire button, electrical current passing through the mesh causes it to glow red-hot – turning the e liquid into vapour.
Vaping mesh wire has a much bigger surface area than a regular coil. As well as delivering more cloud, a mesh vape is also surprisingly smooth. The great thing about a vape with the Mesh 24 RDA is the flavour. This amazing mesh dripper delivers a vape with sparkling clarity.
Vandy Vape’s Mesh 24 RDA can be ordered in Blue, Black, Stainless Steel, Gold, or Rainbow colours.
E liquid isn’t supplied with this mesh dripper. Please visit our High VG E liquids pages, or click here to choose a low nicotine e juice from our colossal range.
1 x Vandy Vape Mesh 24 RDA
1 x Ultem 810 Drip-Tip (Fitted)
1 x Alternative 810 Doc Tip
1 x 510 Drip-Tip Adapter
1 x Packs of Kanthal, Nickel & SS316L Mesh
1 x Blue Screwdriver (Flat Head)
1 x Squonk Pin Allen Key
1 x Set of Spare Seals & Screws
Vandy Vape Mesh 24 RDA Features:
Base diameter: 24mm
Height: 32mm (approx.)
Standard 510 screw connector
Comes fitted with a protruding positive pin
Compatible with Hybrid, mech & regulated mods
BF squonk pin in spares bag
Type: Mesh RDA with flat, dual clamp build deck
Able to accommodate mesh, single & dual coil builds
Comes with KA1, Ni80 & SS316L mesh wire samples
Fitted with a 17.5mm Ultem drip-tip
18.5mm Delrin Doc tip included
510 drip-tip adapter also provided
Side airflow for mesh/dual & single coil builds
Dual adjustable cyclops airflow intakes
Wide spacing of sleeve O rings for leak-free dripping
Dual, below deck clamp slots
2 x flat-head screws for clamping terminals
Blue screwdriver included
Requires wicking cotton (not supplied)
Spare O rings & clamp screws included
Probably the easiest build-deck ever invented
An excellent introduction to mesh vaping
Deck can also be used with all types of DIY coils
Spectacular cloud generation
Incredibly smooth vapour
Superb flavour clarity
Comes with a Black, Blue, Stainless Steel, Rainbow or Gold finish
Mesh 24 RDA Compatibility:
The Mesh 24 RDA has a base diameter of 24mm. This fabulous kit is designed to introduce experienced DIY coil builders to mesh-wire vaping. The Mesh 24 dripper is compatible with standard mech mods, Hybrid and box mods. Mesh 24 RDA builds will typically fire in the 50 to 90 Watt range. Mesh vaping in temperature control mode with SS316L coil wire is recommended for your first build. Buyers must be familiar with Ohm’s law, battery handling, coil wire resistance and DIY building safety.
Check out our warranty terms & conditions page here.
Posted by RR on
I'm getting back into rda's and thot I'd try this mesh rda - a friend of mine used one and once he showed me how easy it was to build I knew I"d have to try it myself.
It honestly is IMMENSELY easy to build and wick!!! I LOVE it!!!
The flavour is AMAZING!!! As good as any high end sub-ohm stock coil.
I have 2, 1 on a squonker which it's perfect for. The other I intend to use as a dripper.
I found the drip-tip a little low so I got a nicer coloured VV one.
A VERY sound rda, oozes quality but NOT juice! Absolutely NO leaks from over-squonking....
Just BEAUTIFUL flavour!!