If you want more cloud and vapour than you get from a basic vaping starter kit, how about upgrading to this SMOK V-Fin 160W Sub-Ohm Vape Kit? This kit comes with a built-in 8000mAh battery. As well as providing more than enough power to drive the kit’s TFV12 Big Baby Prince sub-ohm tank, it also takes away the worry of selecting and maintaining your own vape batteries. This multi-function sub-ohm vape kit is smart and sophisticated – but also easy to use!
FREE 5 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL!
SMOK are one of the most popular manufacturers of big-cloud vape equipment. Usually, their vape mods require one or more special vape batteries. Not with this SMOK V-Fin high-power mod! SMOK have rated the V-Fin’s internal Li-Po battery at 8000mAh – massive capacity that will give you hours of tasty sub-ohm vaping. As well as recharging the internal battery, the kit’s USB cable can also be used to upgrade the V-Fin mod’s multi-function control software.
FREE 5 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL!
The V-Fin mod has traditional box styling. The look is enhanced by sporty trim, and a fashionable range of accented colour finishes. The mod comes with an easily manageable Variable Wattage mode and an advanced suite of Temperature Control (TC) vaping features. On top of the mod there’s a neat OLED display panel. This shows both basic and advanced vaping parameters. It also displays remaining battery power, and a resettable puff counter – quite a luxury if you’re upgrading from a basic e cig!
The V-Fin 160W vape kit comes with a premium quality TFV12 Big Baby Prince sub-ohm tank. This tank, and its replaceable atomizer coils, are designed to deliver exceptionally large clouds and maximum e juice flavour. Cloud volume is managed by adjusting an airflow control ring on the base of the mod. Reducing the airflow will increase the depth of flavour extracted from your chosen e liquid. The kit’s pre-fitted Q4 coil is good for daily vaping at power settings between 50 and 60 Watts. The T8 coil gives a warmer vape at power settings between 60 and 80 Watts – this coil is ideal for fun cloud-chasing! Both coils must be used in power (Variable Wattage) mode only. You’ll need to buy Stainless Steel, Nickel or Titanium coils to vape in Temperature Control (TC) modes.
SMOK’s V-Fin 160W sub-ohm vape kit can be ordered with a choice of finishes: Black/Red, Black/Purple, Black/7-Colour, White/7-Colour, or Silver/Black.
Note: The V-Fin kit comes only with 50ml e juice. We recommend ordering low-nicotine (3mg or 6mg) e juices with this sub-ohm kit. We have some superb flavours on offer in our E Liquids pages.
1 x SMOK V-Fin 160W Mod
1 x SMOK TFV12 Big Baby Prince Tank (EU Edition)
1 x V8 Baby-Q4 0.4 Ohm 4-Core Coil (Pre-fitted)
1 x V8 Baby-T12 0.15 Ohm 12-Core Coil (Alternative)
1 x Spare Parts Bag
1 x SMOK Silicone Vape Band
1 x USB Battery Charge & Firmware Upgrade Cable
1 x V-Fin Kit User’s Manual
SMOK V-Fin 160W Mod Features:
Size: 85mm height, 56mm length, 31.5mm depth
Weight: 294g (with built-in battery)
Style: High-power multi-function box mod with high capacity internal battery
Sporty coloured trim
Compatible with most 510 MTL and sub-ohm tank connectors
Internal Li-Po battery, rated 8000mAh by SMOK
No need to buy & maintain separate batteries
USB charging & software upgrade connector on mod
Quality USB cable included
2 operating modes: Power (VW) & Temperature Control (TC)
Output power: 6 to 160 Watts
Temperature range: 100ºC to 315ºC
Voltage range: 0.5 to 9.0 Volts
TC coil wire compatibility: Stainless Steel, Nickel, Titanium
TC coil resistances: 0.06 to 3 Ohms
VW coil resistances: 0.1 to 3 Ohms
Long Fire bar on side of mod
Setting adjuster bar on top of mod
Raised OLED screen on top of mod
Detailed display showing all vape info
Three vape strength settings
Resettable puff counter
Automatic atomizer detection
Atomizer safety protection
Extra ventilation in base battery door
PCB temperature display
Battery power icon
Automatic vape cut-out after 12 seconds
Ideal mod for new sub-ohm vapers
Great features for advanced sub-ohm vapers
No separate batteries to worry about
5 colour choices: Silver/Black, Black/Red, Black/Purple, Black/7-Colour, or White/7-Colour
SMOK TFV12 Big Baby Prince Tank (TPD Version) Features:
Dimensions: 53.7mm x 22mm
Tank capacity: 2ml (EU Edition)
Resin, cobra pattern drip-tip (wide-bore)
Crown metalwork on top-cap & base airflow adjuster
Hinged top-fill mechanism with push-button lock
Top-cap stays on tank while filling
Tank metalwork: Stainless Steel
E liquid reservoir: Pyrex glass with e juice 360º visibility
Mod connection: Standard 510 screw & insulated pin
Pre-fitted with a 0.4 Ohm V8 Baby-Q4 Quad Core Coil, (Rated: 30W to 65W)
Best Q4 vape settings: 50 to 60 Watts
Extra 0.15 Ohm V8 Baby-T12 Duodecuple Core Coil, (Rated: 50 to 90W)
Best T12 coil settings: From 60 to 80 Watts
Both supplied coils are suitable Variable Wattage (Power) mode only
Tank compatible with all coils in the SMOK V8 Baby range
Mesh & LED illuminated V8 coils available (not supplied)
Organic cotton wicking for big clouds & pure flavours
Giant coil wicking ports for optimum saturation
2 x wide adjustable airflow ports on tank base
Wide airflow promotes cloud, narrow airflow increases flavour
A popular tank with top YouTube vape review channels
A great choice for e cig vapers upgrading to sub-ohm performance
Colours match your chosen V-Fin mod
SMOK V-Fin 160W TC/VW Kit compatibility:
Vape standard 510 screw fittings make this V-Fin mod and Prince Big Baby tank interchangeable with a wide range of high power sub-ohm devices. Please check your equipment manuals to make sure that mods and tanks from other manufacturers have comparable power capability and atomiser resistance ranges.
Replacement V8 Baby coils for the TFV12 Baby Prince tank are available from our Accessories pages, click here for link.
For warranty information see our terms & conditions page.