2nd tank
since my last review of this tank i have since bought another and find making coils for it quite easy,anyone thinking about buying one should have a go you won't regret it
Mouth-to-lung (MTL) rebuildable tank atomizers are pretty rare, so we’re expecting a lot of interest in this Ares RTA Kit from Innokin. Unlike many other rebuildable atomizer kits, the Innokin Ares RTA comes with wicking cotton, ready-made coils, Kanthal wire, and a full set of tools for winding your own DIY coils. The Ares RTA is designed with adjustable MTL airflow, and a TPD legal tank capacity of 2ml.
Normally, we recommend that DIY coil building for RBA’s and RTA’s is best left to the experts. With it’s easy-to-follow instruction sheet, coil building tools and supplies, we believe that this Ares RTA package is probably the best mouth-to-lung rebuildable kit currently available for DIY coil building beginners.
The Ares RTA features a lot of design innovations. For superior flavour and easy building, the Ares tank features a ‘sky build deck’. This raises the coil assembly high in the tank, closer to the drip-tip. A bell-shaped deck-cap helps to boost flavour and deliver a well-defined, satisfying throat-hit.
The deck features dual posts which are designed for easy fitting of a single, low-ohm coil. Directly below the coil, there’s an airflow nozzle with nine micro air channels. The nozzle ensures that airflow can be restricted to a tight, cigarette-style inhale. A single adjustable airflow inlet on the tank base allows you to fine-tune the vapour / flavour balance.
A special, push-back top cap makes filling the Ares RTA a total dream. The e juice ports are big enough to take most types of e juice dropper with minimal hassle. The push-back design also means that there no chance of dropping the top-cap during refilling.
To create this top performing RTA, Innokin teamed up with the guys from the TasteYourJuice YouTube vape review channel. As well as fine-tuning the Ares RTA for mouth-to-lung vaping, Phil and Dimitris also designed two of the coil-winding tools that come with the kit. For top-tips on creating your first Ares build, check out Phil Busardo’s Ares RTA introduction video on YouTube.
This feature-packed, Ares mouth-to-lung RTA kit can be ordered with either a Black or Stainless Steel finish
E liquid isn’t supplied with this Rebuildable Tank Atomizer (RTA). Please visit our E liquids pages, or click here to select a full-flavoured e juice to use with this amazing tank.
Contents:
1 x Innokin Ares RTA (MTL)
1 x Bag of Organic Cotton
2 x Pre-Made 1.0 Ohm MTL Coils
1 x 1m Length of Kanthal Coil Wire
1 x Replacement Tank Glass (Smoked)
1 x Multi-Head Screwdriver
1 x 2.5mm/3mm Coil Winding Tool
1 x 2.5mm/3mm Spaced Coil Winding Tool
2 x Spare Screw Sets
1 x Spare O Rings Package
1 x Alternative Drip-Tip
Innokin Ares RTA MTL Kit Features:
Tank diameter: 24mm
Standard 510 mod connection
Style: Full kit for easy DIY coil building with a mouth-to-lung RTA
Design collaboration with ‘TasteYourJuice’ YouTube channel
Fitted with a 510 Delrin drip-tip
Alternative, shaped MTL drip-tip included
Clear Pyrex glass tube fitted
Spare smoked glass tube included
Push-back top cap for fast refilling
Dual oval ports take all e juice dropper types
Suitable for single coil mouth-to-lung builds
Single adjustable cyclops port on base
Restricted, multi-channel airflow nozzle below coil
Dual deck posts designed for easy ‘drop-in’ building
Side access to dual Phillips terminal screws
Spare flat & Phillips screws
Sky-deck design with domed deck cover
High coil position promotes flavour
Bell shaped cover delivers a smooth MTL vape
Deck cut-outs for easy wick placement
Innovative anti-leak features
Comes with organic cotton & Kanthal coil wire (1m)
Comes with 2 x pre-made spaced Kanthal coils (1Ω)
Phil Busardo 2.5mm/3mm build tool included
Dimitris Agrafiotis spaced coil build tool included
Flat/Phillips screwdriver included
Top-quality Stainless Steel tools
Comes with spare O rings in Green & White
Set a tight or loose draw as required
Astonishing MTL flavour production
A deliciously smooth vape
Simple, graphic instruction sheet
Designed for inexperienced vapers to learn about DIY building
Order in either Stainless Steel or Black
Innokin Ares RTA Compatibility:
The Ares atomizer is designed with restricted airflow to deliver a tight to moderate mouth-to-lung vape. With low-ohm MTL coil builds, this tank can be fired with most low-power mods and batteries. This 24mm diameter RTA has a standard 510 connector.
After doing a little research, this kit is ideal as a device for ‘first-time’ DIY coil builders. Buyers should be familiar with Ohm’s law, vaping battery safety and coil winding. Phil Busardo, the tank co-designer, has an excellent instructional video on his ‘TasteYourJuice’ YouTube channel.
Warranty:
Check out our warranty terms & conditions page here.
We only ship orders to UK and operate a Same Day Dispatch (99% of the time, sometimes delays may occur) on all orders placed before 4pm on working days (Monday to Friday excluding weekends & Bank Holidays). Any orders placed after 4pm cut off on weekdays (Monday to Friday) or over weekends, will be dispatched the next WORKING day. We do not dispatch goods over weekends or bank holidays and do not offer delivery on Bank Holidays.
When you place an order, we will estimate a delivery date for you based on the shipping method you have chosen. This is an estimation only and is not guaranteed delivery date. All orders are shipped in discreet packaging.
You may return most new unopened items (excluding e liquids) within 14 days of delivery for a full refund excluding our postage costs we have incurred. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect item etc.). If the item is reported as defective, we will check item for issue/fault before deeming it faulty.
You should expect to receive your refund within 7 working days of the return arriving with us and being deemed faulty, however, in many cases you will receive a refund more quickly. This time period includes the product testing and the time it takes your bank to process our refund request (3 to 5 working days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Customer Reviews
This Product has 6 Reviews
-
-
great tank
this is the first time i have tried one of this type of tank and i found it quite easy to set up and use. it does give a nice draw and lets the flavour come through so i think when i gather up another few quid i will get another one,thank you innokin for making it so easy to use an rta
-
Good solid quality
Really easy to set up lovely airfow the tank has weight to it the best MTL I have come across, and thanks for a speed of light delivery highly recommend
-
fantastic mtl rda
I have not done any coil building for years however I found this quite easy to do lots on youtube if unsure the tank itself is a very good build good features and easy to fill and includes extras I would recommend getting a decent battery / mod to benefit fully
-
Excellent
Bussardo did the perfect work.Just in your hands this tank is a great experience.Massive,robust,the workmanship is flawless.The install is very easy,the refill is genius. The taste is very close to Kayfun V4.There is a lot of spare parts, what you get more like a gift, this is just a cherry on the cake.
-
All round great MTL RTA
I must say before I start this I do watch Phil on Youtube and he is a guy with an Engineering background the tank is easy to build on and everything you need to get started is in the kit even the cotton there is a qr code in the box which directs you to some guides if you are new to rebuild able for the price amazing value.
