Demon Killer Tiny Kit Starter Kit Free E Liquids Free Delivery
With a Zippo sized mod measuring only 76 x 38 x 14mm, you can see why Demon Vape call this the Demon Killer Tiny Kit. This is certainly one of the smallest RDA vape kits that we have on our shelves. Along with the internally powered, 800mAh Demon Killer Tiny mod, the kit includes a 14mm diameter RDA, 10 pre-wound coils and a wicking cotton pad. This edgy little vape kit is delivered in a stylish, zip-up carry bag.
FREE 3 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL(3mg or 6mg recommended!)
Despite the novelty form-factor, the Demon Killer Tiny mod comes with five-click safety switching and basic atomizer safety features. The Tiny mod even features a colour OLED battery level display panel alongside the atomizer. An internal 800mAh battery avoids the hassles of battery selection and management. The mod has a high-quality case which is fabricated from a combination of Stainless Steel and Zinc alloy. The alloy casing is protected by a bright resin or metallic effect sleeve, emblazoned with a demonic skull.Even though it’s only 14mm in diameter, the Tiny RDA displays some pretty clever design. Deck space is severely limited, so Demon Vape have adopted a unique semi-circular clamp system for coil connection. Even if you struggle with fiddly fittings, Demon vape have made it easy to drop a single coil into the clamp, then tighten the two retaining screws. As well as providing 10 spare coils and wicking cotton, the Tiny RDA kit also includes an impressive blue screwdriver for DIY building.
FREE 3 X 10ML UK MADE E LIQUID INCLUDED IN THIS DEAL(3mg or 6mg recommended!)
Even if you have no experience of building on an RDA, the Demon Killer Tiny kit is the ideal place to start. As well as supplying all of the essential items that you need for your first 10 builds, Demon Vape have also taken care of your vape safety. The Tiny RDA features a one-piece, combined drip-tip and deck sleeve which is made from Ultem. As well as resisting heat, Ultem is an electrical insulator that reduces the chance of a coil short circuit. The Demon Killer Tiny mod also has a protective chip which switches-off the power if an atomizer short circuit is detected.
Click the Add To Cart button to order your Demon Killer Tiny Vape Kit with either a Resin (R) or Metallic (M) finish. We stock the following combinations: M-Black, M-Blue, M-Red, R-Black, R-Blue, or R-Red.
Contents:
1 x Demon Killer Tiny Mod (800mAh)
1 x Demon Vape Tiny RDA (14mm Dia.)
1 x Demon Killer Zip-Up Vape Bag
10 x Pre-Wound Stainless Steel Coils
1 x Organic Cotton Pad
1 x Build Deck Terminal Screwdriver
1 x USB Battery Charge Cable
1 x Kit Manual & Warranty Pack
Demon Killer Tiny Mod Features:
Size: 76mm tall x 38mm long x 14mm wide
Case Materials: Stainless Steel & Zinc Alloy
Case finishes: Resin (R prefix), or Metallic paint (M prefix)
Tank connector: Standard 510 screw & pin
Battery type: Internal 800mAh rechargeable battery
Comes with 1 Amp USB battery charge cable
Five Fire button clicks for on/off
OLED battery level indicator screen on top of mod
White display: >3.9 Volts battery level
Blue display: 3.6 to 3.9 Volts
Red display: <3.6 Volts
Flashing White display indicates atomizer short circuit
Compatible atomizer resistances: 0.5 Ohms to 3.0 Ohms
Single Fire button for simple vaping
Mod will cut-out if fired longer than 10 seconds
Compatible with many mouth-to-lung (MTL) 510 clearomizers
Atomizers & clearomizers bigger than 14mm dia. will overhang
Comes with a fun, demon skull graphic on front
Incredibly compact & stealthy
More fun than an eGo style battery
Comes in 6 Resin/Metallic variations: R-Black, R-Blue, R-Red, M-Black, M-Blue, or M-Red
Demon Vape Tiny RDA Features:
Diameter: 14mm
Fitted with a combined Ultem drip-tip & deck sleeve
Standard 510 vape mod/battery connector
Ultra-compact DIY build deck (Stainless Steel)
Unique, dual semi-circular terminal clamps
Easy positioning of single coil between clamps
Screwdriver supplied for quick coil connection
Comes with 10 x 0.8 Ohm Stainless Steel Coils
Wicking cotton supplied
Rotate Ultem (PEI) deck sleeve to adjust airflow
Dual adjustable airflow ports
Airflow directed to coil sides
Dual deck O rings for sleeve stability
Delivers a mouth-to-lung (MTL) or direct-lung (DL) draw
Estimated power output: 16 to 19 Watts with 0.8 Ohm coil
Simple, well designed RDA
Manufactured for easy building with restricted deck space
Insulated Ultem sleeve reduces risk of a coil short circuit
Very compact & discreet
Great cloud & flavour
Very economic to run
Demon Killer Tiny Kit Compatibility:
This fun, low-power vape kit consists of a separate mod and RDA. Both items are compatible with other low-power vape devices having standard 510 connectors. The Tiny mod’s built-in protection systems make this kit suitable for improving your DIY coil building skills. Please check your Tiny kit manual for details of battery safety, compatible coil resistances and safe DIY coil building.
Warranty:
For warranty information see our terms & conditions page.
We only ship orders to UK and operate a Same Day Dispatch (99% of the time, sometimes delays may occur) on all orders placed before 4pm on working days (Monday to Friday excluding weekends & Bank Holidays). Any orders placed after 4pm cut off on weekdays (Monday to Friday) or over weekends, will be dispatched the next WORKING day. We do not dispatch goods over weekends or bank holidays and do not offer delivery on Bank Holidays.
When you place an order, we will estimate a delivery date for you based on the shipping method you have chosen. This is an estimation only and is not guaranteed delivery date. All orders are shipped in discreet packaging.
You may return most new unopened items (excluding e liquids) within 14 days of delivery for a full refund excluding our postage costs we have incurred. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect item etc.). If the item is reported as defective, we will check item for issue/fault before deeming it faulty.
You should expect to receive your refund within 7 working days of the return arriving with us and being deemed faulty, however, in many cases you will receive a refund more quickly. This time period includes the product testing and the time it takes your bank to process our refund request (3 to 5 working days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Customer Reviews
