Designed by vapers for vapers, this Council of Vapor Trident 60W Mod comes with a bespoke look and feel. If you’re looking for a mid-power, single 18650 battery device, this 60 Watt Trident box mod is programmed with extended variable wattage functions and temperature control capability. Slim and highly portable, the mod features a unique, slip-over sleeve with an elegant, lacquer finish. The Trident 60W mod compliments any good-looking 22mm tank with a standard, 510 connector.
From their HQ in California, Council of Vapor design an exclusive range of vaping tanks and mods. For some vapers, the originality of US designed mods like the Trident makes them much more appealing. The Trident 60 Watt mod is a versatile, mid-power device that will happily fire either mouth-to-lung (MTL) atomizers with a cigarette style draw, or sub-ohm atomizers designed for bigger clouds and flavours.
In variable wattage mode, you’ll find that the COV Trident 60W mod is easy to set up for both MTL and sub-ohm atomizer tanks. Wattage is fully adjustable, and ranges from 1 to 60 Watts. Two simple ‘up’ and ‘down’ buttons take the wattage higher or lower. A built-in custom smart chip stores your settings, atomizer resistance and other technical stuff – even after switch-off. Along with its basic variable wattage features, the Trident 60W mod also gives you the option to choose a ‘powerful’, ‘soft’ or ‘standard’ draw.
The Trident 60W mod’s temperature control mode delivers a smooth, steady vape. For new vapers, temperature control vaping can sound a little complicated. To make it easier for vaping newbies, the Trident 60W mod is programmed for temperature control vaping with Nickel atomizer coils only. The Trident’s user manual is essential reading before you try vaping in temperature control mode! Whichever mode you choose, Council of Vapour have built this mod with 5 custom memory slots to store your favourite settings.
For a quick, convenient recharge, the Trident 60W mod is delivered with its own USB charging cable. This can be plugged straight into your own PC, laptop or mains adapter.
The US designed, Council of Vapor Trident 60W Mod is available with a Dark Grey or White, lacquer effect finish on the sleeve.
Note: Before vaping with this mod you’ll also need a high output 18650 battery, an atomizer tank and e juice.
1 x Council of Vapor Trident 60W Mod
1 x USB Battery Charging Cable
1 x Trident Instruction Manual
Council of Vapor Trident 60W Mod Features:
Size: 92mm tall, 40mm long
Compatible tank diameter: 22mm without overhang
Connector: 510 screw with spring pin
Style: US designed, mid-power VW/TC box mod
Battery type: 1 x 18650 high output battery (not included)
Slip-over battery sleeve with magnets & unlock button
Modes: Variable wattage, bypass & temperature control
Memory: Storage of 5 custom wattage/temperature settings
Comes with Standard, Soft & Powerful vape settings
Output power: 1 to 60 Watts
Temperature settings: 100 to 315º Centigrade
VW/TC compatible coil resistance: 0.2 Ohms (and higher)
Compatible TC coil wire: Nickel only
Stylish metal fire and adjuster buttons
Detailed OLED display panel on side of mod
Icon displays remaining battery power
Full range of short circuit & protection features
Distinctive, US designed mod
Easy to use – “designed by vapers for vapers”
Impressive mid-power performance
Comes in White or Dark Grey
Trident 60W Mod Compatibility:
This 60 Watt mod is compatible with most mid-power, 510 threaded sub-ohm tanks. At lower wattage settings, the mod will easily fire most mouth to lung clearomisers fitted with a standard 510 connector. Please check the specifications in the Trident 60W manual before firing an atomizer on the mod.
For warranty information see our terms & conditions page.
For More Information On What Was Shown In This Video Visit: http://bit.ly/2pgClyu My Instagram: http://www.instagram.com/riptrippers