With its flashing hi-tech innards, the Stentorian AT-7 Box Mod is built to resemble a water-cooled games PC. This chunky device is actually a fixed-voltage, regulated mod with a built-in 3500mAh battery. With an upper power limit of 100 Watts, the mod’s ‘smart power’ AT chip applies a continuous potential of 4.2 Volts to the atomizer (not supplied). The AT-7 mod will take tanks up to 25mm in diameter without overhang.
The Stentorian AT-7 mod’s most stunning features are the illuminated interior pipework and exposed circuit boards. For vaping safety, the pipework doesn’t actually contain cooling water. The US designers have given this mod the look of a water-cooled PC, without the cooling functionality.
This fun device offers the basic simplicity of a mechanical mod, supported by all of the safety features that you normally find in a sophisticated box mod. Even though it looks like a mini PC, this device doesn’t have the complexity of display screen or setting adjustments. The Stentorian AT-7’s smart control chip automatically adjusts the applied current to fire the atomizer at 4.2 Volts. The AT-7 will fire atomizers with resistances ranging from 0.1 to 3.0 Ohms.
A long fire-bar occupies one side of the mod. Pressing the bar anywhere along its length will activate a status light and fire your connected tank. Along with standard, 510 compatible tanks, the Stentorian AT-7 box mod will fire RBA’s, drippers and other rebuildables fitted with Kanthal or Stainless Steel coils.
This fixed voltage AT-7 mod gives a simple LED indication of the battery status. A bright white light shows that the mod is fully charged. As battery power drains, the LED shows a blue, then red light. With a red light showing, the mod’s low voltage protection circuit kicks-in to prevent firing. The mod comes with its own USB cable for recharging with a laptop, PC or wall charger (not supplied).
The Stentorian AT-7 box mod comes with Black, Red or White casing.
This fixed-voltage mod doesn’t come with an atomizer or e juice. Please check-out the wide range of atomizers, RBA’s, RDTA’s and drippers in our Accessories section (click here for link). We also stock an astonishing range of e juice flavours, click here to view our E liquids pages.
1 x Stentorian AT-7 Box Mod
1 x USB Recharge Cable
1 x AT-7 User Manual
Stentorian AT 7 Box Mod Features:
Size: 90mm tall x 74.5mm long x 30.5mm wide
Tank screw: 510 thread with sprung pin
Style: Fun, fixed-voltage box mod with on-board protection systems
Design: Based on the look of a water-cooled games PC
Transparent panels with view of interior circuit boards
Interior LED illumination shows battery charge level
Long fire bar on side of mod
Five clicks for mod on/off
Battery type: Internal with 3500mAh capacity
Output power: 100 Watts maximum
Fitted with AT smart-chip
Output voltage: 4.2 Volts (smart-chip auto adjusts current)
Compatible coil resistance: 0.1 to 3.0 Ohms
USB battery charging with supplied cable
Atomizer short circuit protection
Low atomizer resistance indication
Low voltage & overcharge protection
10 second firing cut-out
Board overheating protection
Simple to use
Fun device for gadget-lovers
Works with a wide range of tanks, RBA’s & drippers
Stentorian AT 7 Box Mod Compatibility:
With space for tanks up to 25mm, this mod will fire a wide range of RBA’s, RDTA’s atomizer tanks and drippers. Check the atomizer coil resistance to ensure compatibility.
For warranty information see our terms & conditions page.