For serious box mod vaping at power levels up to 200 Watts try this Pioneer4You iPV D5. Driven by an advanced YiHi SX330-200 chip, this mod not only gives you total control of your vape, it also stores your five favourite settings in memory.
With its superb build quality and sleek lines, the iPV D5 makes a lasting impression. Slightly bigger than a palm-sized box, this 200 Watt vape mod feels as good as it looks. The battery cover fits perfectly, with no hint of slippage or rattle. The cover is easily removed to gain access to two, series connected 18650 batteries. With no on-board charge facility you’ll need an external charger. The batteries and external charger are not supplied with this kit.
The YiHi chip manages a wide range of settings and preferences. Power is adjustable, from a 10 Watt lower limit right up to a maximum 200 Watts. Acceptable coil resistances in power mode range from 0.15 to 3.0 Ohms. Compatible temperature control coil resistances range from 0.05 to 1.5 Ohms. Coil temperature can be set between 100º and 300º Celsius.
A standard 510 connection links the iPV D5 to all of the popular tanks. The iPV D5 is one of the first mods to feature a dedicated setting for the revolutionary, SX Pure tanks from Pioneer4You.
With so much power and control, the Pioneer4You iPV D5 vape mod is easy to tweak – either for monster clouds or big e liquid flavours. The mod’s advanced safety features give you a dependable, high-power vape at the touch of a button. The feature set is upgradeable via the supplied USB cable.
Choose your Pioneer4You iPV D5 mod in Silver, Black or White.
1 x Pioneer4You iPV D5 Vaping Mod
1 x Authentication Certificate
1 x USB Software Upgrade Cable
1 x User’s Manual
Pioneer4You iPV D5 200W Vape Mod
Size: 100mm x 52mm x 24mm
Connection: 510 screw with spring connector
Compatibility: Compatible with SX Pure tanks
Battery: 2 x 18650 (not supplied)
Charger: External (not supplied)
W Power: 10 to 200 Watts (adjustable)
TC Power: 10 to 120 Joules (adjustable)
I/P Voltage: 6.4 to 9.0 Volts
O/P Voltage: 1.0 to 7.0 Volts
I/P Current: 1.3 to 45 Amps
O/P Current: 1.0 to 45 Amps
Temperature: 100 to 300 deg. C (adjustable)
Temperature control: For NiCr, Ni, SS & Ti coils
Watt Mode Resistance: 0.15 to 3.0 Ohms
Joules Mode Resistance: 0.05 to 1.5 Ohms
TCR Values: 0.0005 to 0.007
Bright display screen
Responsive control buttons
Dedicated SX Pure Tank setting
USB Software upgrades available
Low/high voltage protection
Low resistance safety features
Full short circuit protection
Protected against reverse battery connection
Available in White, Silver or Black
NB: Please note that this mod does not come with any e liquid as this will need to be purchased separately along with a suitable tank for operation.
Check out our warranty terms & conditions page here.