The Council of Vapor Mini box mod that’s not much bigger than a pack of tic-tac mints. The stylish 40 Watt stealth mod features a tactile, rubberised paint finish and attention grabbing, carbon fibre trim. A discreet OLED screen displays your selected wattage, coil resistance and battery power. The mod also comes with a vape ‘ramp-up’ facility to accelerate or delay coil heating. For simple, no-hassle vaping, the Mini Volt mod has a convenient, internal battery with 1200mAh of power on-tap.
Discreet vaping, portability, or an emergency backup – whatever your reasons for choosing a miniaturised vape, this Council of Vapor Mini Volt Kit ticks all the boxes. By sacrificing a temperature control facility, US vape design outfit, Council of Vapor (COV), have significantly reduced the size and cost of this top-quality vaping kit. This doesn’t mean that the Mini Volt mod is a basic model. Pressing the ‘up’ button in conjunction with the fire button enables vaping wattage to be set anywhere from 5 to 40 Watts. A special ‘ramp up’ feature allows you to choose a ‘standard’, ‘soft’ or ‘power’ coil pre-heat for your chosen wattage setting.
The Council of Vapor Mini Volt Kit is trimmed with a Black carbon fibre grip, and exquisitely finished in Black rubberised paint.
1 x Council of Vapor Mini Volt Mod (40 Watts)
1 x Battery Charging Cable (USB)
1 x Mod User Manual
COV Mini Volt Mod Features:
Size: 56mm tall, 35mm long, 22mm wide
Screw: 510 threaded connector with spring
Style: Compact stealth mod – low to medium variable wattage
Comes with carbon-fibre grip & rubberised finish
Battery type: Internal, 1200mAh
Variable power output: 5 to 40 Watts
Ramp-up settings: Soft, Normal, Power
Min atomizer resistance: 0.2 Ohms
Screen: Mini OLED display on top of mod
USB charge port on base of mod
Comes with mini USB cable (charging only)
Charge time: 2 to 3 hours for full charge
Press fire button five times for on/off
Press fire button with ‘up’ to adjust wattage settings
Press fire button with ‘down’ to adjust ramp-up settings
Auto sleep after 10 seconds inactivity
Auto switch-off after 10 minutes inactivity
Easy to use mod
Delivers a full-flavour sub-ohm vape with supplied atomizers
Can power most standard, 510 compatible MTL atomizers
Available in Black colour only
Council of Vapor Mini Volt Kit Compatibility:
The COV Mini Volt mod can power sub-ohm and mouth to lung (MTL) atomizers with a standard 510 connector and a minimum coil resistance of 0.2 Ohms. The mod’s maximum power limit is 40 Watts. This variable wattage mod must not be used with temperature control (Nickel or Titanium) coils.
For warranty information see our terms & conditions page.
Find The TC 100 iSub V Starter Kit at http://www.epikvape.com Other Recommended Starter Kits A. Get The Evic VTC Mini at: http://bitly.com/vapordna Review: https://www.youtube.com/watch?v=suWa6I07N8k B. Get The iJust 2 Kit at: http://bitly.com/vapordna Review: https://www.youtube.com/watch?v=YWMOPb2ErwU C. Get The Kanger SUBOX Mini Kit at: http://bit.ly/1GED95u Review: https://www.youtube.com/watch?v=CntmosKGWtM D. Get The iStick 60W TC Kit at: http://bit.ly/1PQnXUR Review: https://www.youtube.com/watch?v=44dIhEK4meI E. Get The eGo ONE VT at: http://bitly.com/vapordna Review: https://www.youtube.com/watch?v=chxnRBj4im0 My website: http://riptrippers.com/ Vapetrik Ejuice: http://vapetrik.com/