Have you got what it takes to handle this authentic Wismec Noisy Cricket Mod? If you’re used to a regulated mod with variable power control and built-in safety features, you’re going to find vaping with the Noisy Cricket a whole different ball game!
The Noisy Cricket Mod is basically a stylish aluminium box that holds two, series connected 18650 batteries (not supplied). Instead of a sophisticated, computer controlled fire button, this simple mechanical mod has a basic, pass-through fire button that feeds full power directly to the connected atomizer.
Wismec’s Noisy Cricket mod is fitted with a ‘hybrid’ style 510 atomizer tank connection. This means that the mod is only compatible with tanks and drippers that have a protruding positive pin. Using a tank with a standard 510 pin arrangement risks shorting out the series connected batteries. With no protective systems built into the mod, there would be a serious risk of catastrophic venting.
To change the batteries in the Noisy Cricket, you need to unscrew the fire button and the hybrid 510 connector. The batteries slip down into the Cricket’s aluminium casing. It’s essential that you get the battery polarity right. The Noisy Cricket mod doesn’t come with reverse polarity protection. A separate charger will also be needed. Experienced vapers recommend that dual batteries are ‘paired’ and put through identical charge and discharge cycles.
So, what’s the vape like with an authentic Wismec Noisy Cricket mod? With full, series connected voltage applied directly to the coils, the hit is instant and extreme. The Noisy Cricket will extract the ultimate cloud and flavour possible from any perfectly wicked build. Wismec recommend RDA coil builds between 0.25 and 0.5 Ohms. With no short circuit protection built into the mod, you need to ensure that your build is 100% safe before you fire your tank or RDA on the Noisy Cricket.
This authentic Noisy Cricket mod is available with a natural, brushed aluminium finish.
Note: Before you can use this mod, you’ll need batteries, a dual battery charger and a hybrid RDA or tank.
1 x Authentic Wismec Noisy Cricket Box Mod
1 x Wismec User Manual
Size: 79mm x 40mm x 22mm
Style: Unregulated, mechanical mod
Power: Full battery power applied to coils
Batteries: 2 x 18650 cells (Not Supplied)
Battery connection: Internal series connection
Fire button: Simple, direct push button connection to battery
Battery replacement: Unscrew fire button & 510 connector to access batteries
Recharging: Use external charger
Connector: 510 hybrid connector
Takes Hybrid RDA’s & tanks up to 22mm diameter without overhang
No electronic protection or regulation circuits
Requires advanced knowledge of battery safety
Requires an understanding of Ohm’s law
Coils, tanks & RDA’s must be tested before fitting/firing
Features 6 cooling/venting holes on base
Designer styling by JayBo
Only suitable for experienced mechanical mod enthusiasts
Finish: Natural, brushed aluminium
The Noisy Cricket is an unregulated mechanical mod with no built-in protection circuits. This mod is only suitable for experienced, mechanical mod enthusiasts with a detailed understanding of battery safety, Ohm’s law, coil resistance and hybrid RDA’s/tanks.
Check out our warranty terms & conditions page here.