Site Information

E-Liquids Loading... Please wait...
  • Kanger Arymi Armor DL Starter Kit Free E Liquid Free Delivery
  • Kanger Arymi Armor Kit Tank
  • Kanger Arymi Armor DL Starter Kit Packaging
  • Kanger Arymi Armor Side View
  • Kanger Arymi Armor DL Starter Kit Free E Liquid Free Delivery

Kanger Arymi Armor DL Starter Kit Free E Liquid Free Delivery


£49.95 £28.99
(You save £20.96)
SHIPPING: Free Shipping

Out of Stock


Product Description

Product Reviews

The Kanger Arymi Armor DL Starter Kit is the simple, low cost route into sub-Ohm, direct lung (DL) vaping. This eye-catching starter kit features a compact, stealth mod and an easy-to-use atomizer tank that will hold 3ml of e juice. For extra protection in your bag or pocket, the tank is shielded by a stylish, protective cradle.

There are two basic styles of vaping: the mouth to lung style (MTL), where a puff of vapour is drawn into the mouth then inhaled, or a direct lung (DL) vape, where more vapour is drawn directly into the lungs. Most new vapers opt for the MTL style because it is more like a traditional cigarette inhale. Some vapers go straight for the adventurous, DL experience – this is the style used by cloud chasers and fans of big flavours.

The Arymi Armor DL Starter Kit comes with big, refillable atomizer tank that’s been specially designed for an easy introduction to DL vaping. The Arymi Armor atomizer comes with a replaceable 0.3 Ohm, Stainless Steel CHC (clean hands) coil. This is a high performance sub-Ohm coil that delivers exceptionally clean flavour and great cloud volume. To fill the Armor tank with fresh e juice you simply unscrew the combined coil and mouthpiece, then drip up to 3ml of e liquid into the Pyrex glass tank. After you’ve screwed the coil back into place, give it a minute or two to soak up the fresh e juice. After that you just fire up your Arymi Armor mod and vape!

The Arymi Armor mod is just as easy to use. Inside the sleek, protective casing there’s a built-in, 2600mAh rechargeable battery. As well as giving you enough power for hours of vaping, you never have to worry about battery replacement, Amps, polarity or any other technical stuff. A simple 5 dot display on the front of the mod tells you how much power is left in your battery. When you’re down to your last few dots, just plug in the supplied USB charge cable and bring your Armor mod back up to full power.

For simple, sub-Ohm vaping it’s hard to beat this incredibly affordable, Arymi Armor DL Starter Kit. The Armor box mod will fire almost any 22mm atomizer tank designed for mid-power vaping between 15 and 50 Watts. Even if you’re not a fan of DL (direct lung) vaping, watch out for the special, Armor MTL coil from Arymi.

The Arymi Armor DL Starter Kit comes in a choice of 3 cool colours: Black, White or Silver.

Note: E liquid is not supplied with this Arymi starter kit – please order separately from our E liquids pages by clicking this link.

1 x Arymi Armor 2600mAh Mod
1 x Arymi Armor 3ml Atomizer Tank
1 x Armor CHC Replaceable 0.3 Ohm Coil
1 x Wide Bore Delrin Drip-Tip (Built Into Coil)
1 x O Ring Pack
1 x USB Charging Cable
1 x Armor User Manual

Arymi Armor Mod Features:
Size: 82mm x 44mm x 25mm
Connector: Sprung 510 screw connection
Material: Zinc alloy
Style: Compact stealth mod
Battery type: Built-in, rechargeable
Battery capacity: 2600mAh
Minimum atomizer resistance: 0.15 Ohms
Maximum tank diameter: 22mm
Removable protective tank cradle
Simple 5 LED battery level display
USB charge port
Comes with compatible USB charging cable
Total simplicity – fire button only
Press fire button 5 times for on/off
Cuts off automatically after 10 seconds firing
Low battery warning
Short circuit warning & protection
Ventilated case design
No complex set-up required
3 Case colour options: White, Black or Silver

Arymi Armor Atomizer Tank Features:
Armor Tank diameter: 22mm
E liquid capacity: 3ml
Tank case: Stainless Steel
Tank material: Pyrex glass (heat & acid resistant)
Connector: Sprung pin (510 standard)
Drip-tip: Wide bore mouthpiece built into coil
Airflow: Dual, fixed airflow ports on drip-tip
Filling: Unscrew combined drip-tip & coil for access to tank
Comes with 1 x 0.3 Ohm SS316L Armor CHC coil heads
Clean hands (CHC) coil change system
Easily dismantled for cleaning
Direct lung (DL) vaping experience
Enhanced flavour & cloud production

Arymi Armor Starter Kit compatibility:
The Arymi Armor mod can be used with other atomizer tanks having a standard, 510 screw connection and an atomizer resistance of 0.15 Ohms or higher. Due to the mod’s compact design the maximum compatible tank diameter is 22mm. The Arymi Armor atomizer tank is compatible with all replaceable coils in the Armor CHC range.

For warranty information see our terms & conditions page.

Write Review

This product hasn't received any reviews yet. Be the first to review this product!