Innokin Endura T22 Starter Kit Free Delivery

With stylish, easy to use products like the Innokin Endura T22 Vaping Starter Kit on the market there’s never been a better time to quit smoking. With no complicated adjustments or settings to worry about, this safe and simple kit is the easy way to kick the tobacco smoking habit.

The Innokin Endura T22 is a clean, convenient e cigarette that’s completely free from all of the harmful tars and chemical compounds contained in tobacco smoke. Instead of creating smoke, e cigarettes vaporise a specially formulated ‘e liquid’. When you vape with the Innokin Endura T22, you actually inhale water vapour, glycerine, a little nicotine and delicious flavourings. Most of the cloud that you exhale is harmless water vapour.

Innokin have designed the Endura T22 to deliver a tight, cigarette style draw. In the vaping world this style is called ‘mouth to lung’ vaping. This style of vaping brings out the full flavour of the e liquid without producing enormous clouds of vapour.

The Innokin Endura T22 device comes as a 3 part kit. At the top of the kit is the removable drip-tip. This is where you inhale the vapour. The drip-tip plugs into a tank that holds your e juice. You’ll find that the top section of the tank unscrews for a quick and easy top-up with fresh supplies of e liquid. The tank will hold 4ml of e liquid – for many vapers that’s easily enough for a full day.

Inside the tank there’s a special coil. Power from a battery heats up the coil, turning some of the e liquid into tasty, satisfying vapour. The Endura T22 coils have authentic Japanese organic cotton wicks. This helps to ensure that you get the best possible flavour from your e liquid. Eventually, your coil will need to be replaced. The typical lifespan is about 2 weeks – though it depends how often you vape. Replacement coils for the Endura T22 are cheap and widely available.

The elegantly styled box section below the tank houses the battery, along with electronic control and safety systems. The Innokin Endura T22 vaping starter kit has a high capacity battery, with enough power to keep most vapers going all day. A three press sequence on the ‘power’ button switches the device on and off. Hold the power button in while you take a draw. It really is that simple!

Green and red lights behind the power button show how much power is left in your battery. A red light tells you that it’s time to recharge. The Innokin Endura T22 starter kit comes with a USB charging cable, a spare coil and drip-tip. This neat device even lets you carry on vaping while the battery is being recharged!

The Innokin Endura T22 vaping starter kit comes in Black, Silver or Blue.

NB: Please note that this starter kit does not come any e liquids as these will need to be purchased separately.
 
Contents:
1 x Innokin Endura Battery
1 x Innokin Endura T22 Tank/Clearomizer
1 x Replaceable 1.5 Ohm Coil (Fitted)
1 x Replaceable 1.5 Ohm Coil (Spare)
1 x Replaceable Drip-Tip (Fitted)
1 x Spare Replaceable Drip-Tip
1 x Spares Pack
1 x Micro USB Charging Cable
1 x User’s Guide

Innokin Endura T22 Starter Kit Features:
Stylish, ‘box mod’ style e cigarette kit
Built-in high capacity battery
Simple to operate
Clean, convenient top filling facility
Easy coil replacement
Replacement coils are cheap and widely available
Designed for a tight, cigarette style draw
Discreet, moderate cloud production
Extracts full flavour from any e juice (not supplied)
Provides a satisfying nicotine hit
Allows you to vape while recharging the battery
Great as an aid to quit smoking
Safe, easy to use kit for beginners
Available in 3 cool colours: Black, Silver and Blue

Innokin Endura Battery:
Built-in, long lasting 2200mAh rechargeable battery
Max output: 14 Watts
Coil resistance range: 1.2 to 2.5 Ohms
Max output current: 3.5 Amps
Max output voltage: 5.5 Volts
Charging: 1 Amp at 5 Volts (Micro USB)
Designed for use with the T22 tank/clearomizer
Easy to use, with 1 button operation
Hold down button to vape
Flashing green/red LED battery level warning
Micro USB charge port on battery
 ‘Pass through’ vaping facility while charging
Comes with a USB charging cable

Innokin T22 Tank/Clearomizer:
Capacity: 4ml
Standard, screw thread
Designed for use with the Endura battery
Designed to give a tight, cigarette style vape
Stainless steel casing
Heatproof Pyrex glass tank section
Comes fitted with a 1.5 Ohm replaceable Kanthal coil
Comes with a spare 1.5 Ohm replaceable Kanthal coil
Comes with fitted and spare drip-tip
Simple, top fill mechanism

Innokin Endura T22 Starter Kit Safety Features:
3 click on/off button safety sequence
Auto cut-out if button is pressed for more than 15 seconds
Short circuit protection
Low coil resistance detection & cut-off
Over discharge battery protection

Replacements parts:
Replaceable coils/atomizer heads for Innokin Endura T22 starter kit can be purchased in our accessories section or clicking here

Warranty:
For warranty information see our terms & conditions page.