With its big, 3000mAh built-in battery, the Eleaf iJust S Sub-Ohm Starter Kit will appeal to both new and veteran vapers. A cylinder diameter of 24.5mm makes ample room for the boosted battery power. It also increases the tank capacity to a full 4ml. Roughly the same height as an iPhone, this pen style e cigarette is easy to carry in a pocket or purse. The Eleaf iJust S is great as a discreet backup device for experienced vapers. Easy operation also makes this kit ideal as a first sub-ohm vape.
Eleaf produce some of the best pen-style e cigarette devices that you can buy here in the UK. When it comes to safety, dependability, and good looks, Eleaf consistently hit the mark. The Eleaf iJust S starter kit is designed specifically for sub-ohm vaping. Sub-ohm devices use special, high energy atomizer coils to bring out the full flavour of your chosen e liquid. Sub-ohm coils also generate much more vapour than a basic e cig device. Most sub-ohm vapers and cloud chasers take a deeper ‘direct lung’ inhale when they use a device like the Eleaf iJust S.
The iJust S e cigarette is a two-part device. The top part is a removable atomizer tank that holds your e juice and a sub-ohm atomizer coil. The iJust S kit comes with a simple user manual. This is an easy-read that shows you how to prime your coil with e juice, and fill the tank. With a full tank, and the coil primed, you’re ready for your first vape!
Safety is top priority with the iJust S e cigarette. To stop the device being activated accidentally in your bag or pocket, you need to click the fire button 5 times to switch the battery on or off. Once the iJust S is switched on, you simply press the fire button to vape. With this simple, ‘one button’ device, you don’t need to worry about complicated settings and adjustments. Each time you vape, the fire button will light-up to show how much charge is left in the battery. When the light starts flashing, you’ll need to plug in the supplied USB charging cable.
Along with the pre-fitted coil, the Eleaf iJust S e cigarette comes with two other sub-ohm coils for you to try out. The coils have a simple screw fitting, which makes them incredibly easy to change. All atomizer coils start to wear out after a week or more of regular vaping. Once you’ve decided which coil you like best, replacement iJust S coils are widely available from local and online stores.
Eleaf’s iJust S sub-ohm starter kit can be ordered in Stainless Steel or Black.
1 x Eleaf iJust S 3000mAh Battery
1 x Eleaf iJust S Atomizer Tank
1 x 0.3 Ohm EC Atomizer Head (Fitted)
1 x 0.5 Ohm EC Atomizer Head (Spare)
1 x 0.18 Ohm ECL Atomizer Head (Spare)
1 x Rubber Airflow Ring
1 x Charging Cable (Mini USB)
1 x iJust S Instruction Manual
Eleaf iJust S Battery Features:
Size: 139mm tall (with drip-tip & tank), 24.5mm wide
Fitting: 510 screw with sprung pin
Battery capacity: 3000mAh
Style: Discreet, pen-style sub-ohm device
Direct output (max available voltage applied to coil)
Easy, single button operation
Fire button LED flashes when battery power low
Recharge from USB power source with supplied cable
Approx. 4 hours to recharge with mains adapter (not supplied)
5 Click on/off sequence
Auto cut-out after long (>15 sec) firing
Short circuit protection
Low battery warning and cut-out
Ventilated battery compartment
Loads of power from 3000mAh battery
Great backup device for veteran vapers
Easy-to-use for new sub-ohm vapers
Eleaf iJust S Atomizer Tank Features:
Tank capacity: 4ml
Connection: 510 screw
Glass: Pyrex (heat & acid resistant)
Top-fill tank for clean, fast refills
Wide, fixed airflow
Comes with rubber airflow control ring
Comes with stainless steel, replaceable 510 drip-tip
Fitted with 0.3 Ohm EC Kanthal wire atomizer coil
Spare 0.5 Ohm EC atomizer Kanthal wire coil
Spare 0.18 Ohm ECL Stainless Steel wire atomizer coil
Easy, screw-in coil changes
Tank colour co-ordinated with battery
Comes set up for sub-ohm (direct lung) vaping
iJust S atomizer coil compatibility:
The Eleaf iJust S atomizer tank is compatible with Eleaf’s EC and ECL coils. The iJust S battery doesn’t have a temperature control mode. This means that the battery is only compatible with coils having Kanthal, Nichrome or Stainless Steel coil wire. Replacement coils can be found in our Accessories pages (click here for link).
For warranty information see our terms & conditions page.