This is the Pioneer4You iPV D3 80w TC Box Mod – one of the slimmest 80 Watt vaping devices that you’ll find on the market.
The mod’s aluminium casing features smooth, ergonomic design. It’s a real pleasure to hold and also slips easily into a pocket or bag. The battery compartment cover features high-powered magnets offering easy access to a single, 18650 battery (available separately).
The iPV D3 Mod is driven by Pioneer’s innovative YIHI SX150H controller. This chip cheerfully handles power and temperature modes, also switching-in either Nickel or Titanium coils with ease. A bright screen on the side of the unit keeps you updated on battery capacity, and other vital statistics. Two subtle push-buttons are used to set power output between 7 and 80 Watts. Coil temperature settings range from 5 to 50 Joules.
With a standard 510 fitting. The iPV D3 mod can be used with a wide range of other, sub-Ohm tanks.
The Pioneer4You iPV D3 Box Mod is available in Black only
NB: Requires one 18650 battery INCLUDED FREE usually £7.99
1 x Pioneer4You iPV D3 80W Mod
1 x Charge cable – USB fitting
1 x User instructions & data sheet
Pioneer4You iPV D3 80W Mod:
Control chip: YiHi SX150H
510 Tank connection
Requires separate 18650 battery
Magnetic battery cover
Operating wattage: 7 to 80 Watts
Temperature range: 10 to 75 Joules
Operating temperatures: 100 to 300ºC
Works with Nickel & Titanium coils
Handles coils of 0.15 to 3.0 Ohms
Output current: 1 to 30 Amps
Output voltage: 1 to 7 Volts (step down supported)
Bright, side mounted screen
Battery power indication
Low/high voltage protection
Low resistance protection
Short circuit protection
Reverse battery protection